drilling books
drilling today subscribe
the water well drilling industries  
HOME | ABOUT US | ADVERTISE IN MAGAZINE | BOARD | EDITOR’S DESK | MEDIA KIT

drilling bits
 
Bulroc Dth Drilling
dth products
numa hammers
mincon rockdrills
hi-tech
sai deepa rock drill

KLR Industries
 

Self Propelled Skid Mounted Rig

 
Self Propelled Skid Mounted Rig
 
Description CDR 150 (CORE) CDR-150 (DTH)
Drilling Capacity
Regular Drill hole Diameter 76 mm(Core:Ø 54 mm)
114.3 mm(Ø 4.5”)
Maximum Drilling Depth (Regular) 450 Feet. 500 Feet.
Over Burden Drill hole Diameter --- 165.0 mm(Ø 6.5”)
Over Burden Max. Drilling Depth --- 120 Feet.
(Under favorable drilling conditions)
MAST
Overall Length 6150 (+/- 50 mm) 6150(+/- 50 mm)
R. H. Travel 4200.0 mm 4200.0 mm
Rod Handling Capacity 3.0 Mt. (10 Feet) 3.0 Mt.(10 Feet)
Bottom Guide Ø 240.0 mm (Ø9.5) Ø 240.0 mm (Ø9.5”)
Hydraulic System
A. Primer Mover Deck Engine Deck Engine
B. Feed
Pull Back/Up Force 4,500 Kg.f. 4,500 Kg.f.
Pull Down Force 2,300 Kg.f. 2,300 Kg.f.
Pull Down Speed 30 m/min. 30 m/min.
Pull Back/Up Speed 24 m/min. 24 m/min.
C. Rotation
Speed 0_625rpm 0-100 rpm
Torque 59.0kg.f-m 230 Kg. f-m
Air Compressor
Minimum Suggested
(for DTH Drilling)
-N.A-) 600 CFM @ 200 PSI
Hydraulic Oil Cooler
Capacity 40 GPM US 40 GPM US
Type Fin type: Oil to Air Fin type: Oil to Air
Drive
Hydraulic Motor Hydraulic Motor
Auxiliary Wireline Winch
(Optional 800Kg.f @ 40 Mt./min 800Kg.f @ 40 Mt./min
Water Injection Pump
Capacity Suggested Min. 36 LPM @ 30Kg.f/cm2 36 LPM @ 30Kg.f/cm2
Drive & Mounting
(optional)
Hydraulic Hydraulic

   
 
 
www.drillingrigs.co.in | www.dthhammers.net | www.mudpump.co.in | www.drillrods.net | www.dthbuttonbits.net | www.rockdrillhoses.com | www.submersiblepumpsandmotors.com | www.drillingaircompressors.com | www.drillingoperators.com | www.drillingrigsforsale.in | www.rotarydrillingrigs.com | www.downthehole.in | www.waterwelldrillingrigs.com | www.useddrillingrigs.co.in | www.dthdrillingrigs.com